how to install ELM327 USB Drivers, ELM327 scanner software
ELM327 USB OBD2 EOBD CAN BUS interface is PC-based ELM scan tool. ELM327 USB OBD2 scanner works on both DOS and windows platforms. So do you know how to install ELM327 USB Drivers and ELM327 OBD2 Software?
Okay, please just follow us, ADK auto diagnostic supplier will share with you the installation instructions step by step here:
STEP 1: Install Latest ELM327 Hardware USB Driver Files
STEP 2: Test If ELM327 USB Cable is Installed Correctly
PLS CONNECT your ELM327 USB cable to any USB port on your laptop
Click my computer, Access Device Manager
Windows Vista/7/8: Control Panel » System » Device Manager
Windows XP: Control Panel » System » "Hardware" tab » Device Manager
Or Expand "Other Devices" and "Ports (COM & LPT)"
Problem: Troubleshooting: Fix for Troublesome ELM327 USB Cables...
Right-click on any of the named devices with a yellow mark — and click on "Update Driver Software". Example...
Then, How to Scan & test your car by ELM327 USB Cable
Quick Start Guide On How To Begin Scanning Your Car...
Step 1: Install your ELM327 OBD2 software. Don't launch it yet.
Step 2: Connect the ELM327 USB cable to your computer and car.
Step 3: Place the key in the ignition and turn it forward to the "ON" position. (Position where all dashboard lights are on. It's one position before engine starts.)
Step 4: Launch your ELM327 OBD2 software. Click "Connect", and it'll auto-connect to the car.